Installing MIUI on Swipe Elite Plus
INSTALLATION OF MIUI ON SWIPE ELITE PLUS
" THIS IS NOT MY WORK, I JUST ADDED SOME TWEAKS AND ARRANGED ALL TOGETHER FOR SWIPE ELITE PLUS "
Thanks To: Olch,bencebacsi
IF YOU DONT RESTORE YOUR QCN YOU WILL NOT HAVE NEWORK COVERAGE
For QCN RESTORE visit:
http://sanfranciscoandroid.co.uk/android/unlock-orange-san-francisco-ii/install-qpst-and-backup-qcn-orange-san-francisco-ii/
[Restore QCN By Clicking Restore]
*if you can't restore the QCN then FLASH STOCK FIRMWARE !!
IF YOU DONT RESTORE YOUR QCN YOU WILL NOT HAVE NEWORK COVERAGE
For QCN RESTORE visit:
http://sanfranciscoandroid.co.uk/android/unlock-orange-san-francisco-ii/install-qpst-and-backup-qcn-orange-san-francisco-ii/
[Restore QCN By Clicking Restore]
*if you can't restore the QCN then FLASH STOCK FIRMWARE !!
ADVANTAGES
#greater touch responce (same as xiaomi phones)
#more battery backup (Depends up on usage )
#less heating(dont expect too much!)
#faster
#smoother
#good camera(MIUI camera)
Notice:I am not Responsible if you Brick your device! do with your Confidence!
Do all the steps if you running on STOCK ROM!
STEP 1
Connect your phone to the pc (Win7 Recommend) in download mode
FOR DOWNLOAD MODE:
- Connect your phone to pc (ON/OFF no problem)
- Hold down VOLUME UP+VOLUME DOWN+POWER
- Then a Warning Screen comes
- press VOLUME UP BUTTON (Now you are on Download mode. done!)
STEP-2
Normally in windows 7 the drivers of your phone installed automatically. after connecting your phone (in download mode) to pc check the drivers are properly installed! to check Go to mycomputer>device manager>you can see there a com port.
STEP 3
Install the Flashing Tool
Download it from here: https://drive.google.com/open?id=0B2hGPgBkiCeGOFpJLVlGcE5kQXc
STEP 4
After Completing intallation BACKUP your QCN file
- Stat>All Programs>QPST>QFIL
- then select TOOLS>QCN BACKUP RESTORE then backup your QCN.
IF YOU CAN'T BACKUP YOUR QCN DON'T WORRY JUST DOWNLOAD IT FROM HERE
STEP 5
After completing QCN BACKUP you can flash the TCL M3G FIRMWARE to convert your Swipe Elite Plus to M3G.
You need to download the firmware from here
:http://www.mediafire.com/download/p7rcyqanm2o8dau/Q39_zhongxing_20150717.zip
4.Click DOWNLOAD
1. TWRP RECOVERY:
https://drive.google.com/open?id=0B2hGPgBkiCeGa0l4OXJCLXBDRkU
:http://www.mediafire.com/download/p7rcyqanm2o8dau/Q39_zhongxing_20150717.zip
- After downloading Extract the zip file.
- after extraction open QFIL
- SELECT FLAT BUILD
STEP 6
- After download complete HOLD your POWER BUTTON (10sec)
- when the phone is powered a small linux logo appear.. then you all done!
- NOW YOUR DEVICE IS CONVERTED TO TCL M3G.
STEP 7
- After Setup Complete SWITCH OFF the phone.
- hold down VOLUME UP+POWER BUTTON to enter recovery
- Then select Go to BOOT LOADER
- Now Download This two Files
https://drive.google.com/open?id=0B2hGPgBkiCeGa0l4OXJCLXBDRkU
2. ADB DRIVER:
After downloading these files
- Extract ADB Drivers then put twrp.img into that folder
- Open Command Window then copy and paste this command "fastboot flash recovery twrp_en.img"
- After completion turn on the device by holing the POWER BUTTON
- Then Download this file :
http://www.needrom.com/wp-content/uploads/2016/09/miui_MiTCL_Global_V8.0.1.0_b1.zip
- After downloading this copy this file to your Phones Internal Storage.
- Then go to Recovery mode by pressing VOLUME UP+POWER BUTTON
- After entering TWRP recovery mode
- Press WIPE>ADVANCED WIPE
- select Dalvic Cache, system,Data,Cache
- press SWIPE TO WIPE
- After wiping go back and click INSTALL>then select the file you copied then press SWIPE TO CONFIRM FLASH
- Reboot To System.
- RESTORE QCN File that you downloaded in STEP 4 *IMPORTANT
YOU INSTALLED MIUI 8.01
=======================================================================
SOME TWEAKS FOR SMOOTH EXPERIENCE
- Download and Flash this file (Same as the above steps) https://drive.google.com/open?id=0B2hGPgBkiCeGVXRyd01TYmJuZlE
- then install Super SU App from PlayStore
- now your phone is rooted!
- Then Install ES File Explorer app from play store.
- Delete those files and Reboot.. you All DONE !!!!! Experience the Change .. :) Give Responce in the Comment section Below..
*if any Queries.. Comment..
[ IF YOU HAVE BLACK SCREEN PROBLEM THEN FLASH THE STOCK FIRMWARE AFTER STEP 5, THE PROCEDURE SAME AS STEP 5. ]
FOLLOW US FOR MORE UPDATE
Thank You!
This comment has been removed by the author.
ReplyDeleteWhat is the comment if u delete em how would we know how the comments are
DeleteThis comment has been removed by the author.
ReplyDeleteUnder tweaks mentioned that "Download and Flash this file (Same as the above steps)", please let us know which file.
ReplyDeleteUnder tweaks it is mentioned "ownload and Flash this file (Same as the above steps)" but no link, please let us know which file.
ReplyDeletesorry for the error caused! the link is added! :)
DeleteAfter flashing tcl ROM and backup ing qcn file only sim1 is working and sim2 imei is shown as invalid how can I resolve it
ReplyDeleteThis comment has been removed by the author.
ReplyDeleteThis comment has been removed by the author.
ReplyDeleteall done successfully installed the custom rom working fine !! but i cannot restore qcn file..
ReplyDeleteits not going to download mode..someone please help me..
sir successfully converted to linux. phone started with bird mark after that android and all menus in chinese. but no network as in qfil restore / backup qcn option was not working. it was also not going to recovery mode , tried to flash twrp but it also shown success but phone was not booting to recovery or twrp. again flashed the elite flash company file but now phone is not starting at all. please help me.
ReplyDeletePlease make sure that Reset after Done option in check in qpst configuration,
Deletemiui_MiTCL_Global_V8.0.1.0_b1.zip download link not found please update
ReplyDeletehttps://bsp.needrom.com/2016/12/miui_MiTCL_Global_V8.1.5.0_b2.zip
ReplyDeletesim 2 not working even unable to use sim1 jio net
ReplyDeleteanil is right. sim 2 not working and unable to use internet even 2g using sim1
ReplyDeletesim 2 working alongwith jio sim on sim1 slot. if sim2 not working try to restore qcn file
ReplyDeletesim 2 not working
ReplyDeletecan it be done with windows 10
ReplyDeletei am not able to do this with windows 10
ReplyDeletesim 2 is not working even restored different types of qcn files.help me pls....
ReplyDeletesim 2 is not working even restored different types of qcn files.help me pls....
ReplyDeletesim 2 is not working even restored different types of qcn files.help me pls....
ReplyDeletePlease restore the qcn with latest qfil where you need to select both Sim's then only it will work
Deletethanks all works well. just invested more time to understand the things.
ReplyDeletehttps://www.needrom.com/wp-content/uploads/2017/02/miui_MiTCL_Global_V8.1.7.0_b1.zip
ReplyDeleteupdated ROM
https://www.needrom.com/download/miui8-global-stable/
ReplyDeleteUsb mtp not working.when I connect phone to usb, nothing comes in pc.it is Not detectable by pc
ReplyDeleteI'm getting edl error ... Failed to enter emergency download mode
ReplyDeleteYou need to connect the device Vol+Vol- then connect the usb cable at a time then only it will connect
DeleteI installed all custom roms but there is no Volte support if we get Videocon q1 firmware which support Volte and if any one can post Lyf water 7 firmware to this device it will be awesome
ReplyDeleteVery very thanks to moderator. I re-flashed and update my Swipe Elite plus to MIUI 8.1.7.0(LXIMIDI) smoothly. There is a problem still NVItemJni is being crashed. is there any solution to fix it. I try to force stop this but notification are still coming. After all the tutorial is superb. Thanks again
ReplyDeleteUPDATE THIS :
ReplyDeleteVOLUME UP + VOLUME DOWN + POWER <---- THIS WORKING FOR BOOTLOAD
Why we need to flash this TCL M3G firmware??
ReplyDelete